View 2SD2259_334156.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Transistor
2SD2259
Silicon NPN epitaxial planer type
For low-frequency amplification
Unit: mm
6.90.1
0.15
1.05 2.50.1 0.05
(1.45) 0.8
0.5 4.50.1
0.7
4.0
s Features
q q q
0.65 max.
1.0 1.0
High foward current transfer ratio hFE. Low collector to emitter saturation voltage VCE(sat). Allowing supply with the radial taping.
0.2
Collector to base voltage Collector to emitter voltage Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature
*
VCBO VCEO VEBO ICP IC PC* Tj Tstg 1cm2
20 20 15 1.5 0.7 1 150 -55 ~ +150
V V V A A W C C
1.20.1 0.65 max. 0.45+0.1 - 0.05
Note: In addition to the lead type shown in the upper figure, the type as shown in the lower figure is also available.
1:Emitter 2:Collector 3:Base MT2 Type Package
Printed circuit board: Copper foil area of thickness of 1.7mm for the collector portion
or more, and the board
2.50.1
Parameter
Symbol
Ratings
Unit
1
2
3
0.45-0.05
+0.1
s Absolute Maximum Ratings
0.45-0.05
+0.1
(Ta=25C)
2.50.5
2.50.5
(HW type)
s Electrical Characteristics
Parameter Collector cutoff current Collector to base voltage Collector to emitter voltage Emitter to base voltage Forward current transfer ratio Collector to emitter saturation voltage Transition frequency Collector output capacitance
(Ta=25C)
Symbol ICBO ICEO VCBO VCEO VEBO hFE VCE(sat) fT Cob Conditions VCB = 15V, IE = 0 VCE = 15V, IB = 0 IC = 10A, IE = 0 IC = 1mA, IB = 0 IE = 10A, IC = 0 VCE = 10V, IC = 150mA* IC = 500mA, IB = 50mA* VCB = 20V, IE = -20mA, f = 200MHz VCB = 10V, IE = 0, f = 1MHz 20 20 15 1000 0.15 55 10
*2
min
typ
max 1 10
Unit A A V V V
2500 0.4 V MHz 15 pF
Pulse measurement
14.50.5
1
Transistor
PC -- Ta
1.2 200 Printed circut board: Copper foil area of 1cm2 or more, and the board thickness of 1.7mm for the collector portion. Ta=25C 2.0
2SD2259
IC -- VCE
2.4 VCE=10V
IC -- VBE
Collector power dissipation PC (W)
1.0
Collector current IC (mA)
0.8
90A 120 80A 70A 60A 80 50A 40A 40 30A 20A 10A
Collector current IC (A)
160
IB=100A
1.6
25C Ta=75C -25C
0.6
1.2
0.4
0.8
0.2
0.4
0 0 40 80 120 160 200
0 0 2 4 6 8 10 12
0 0 0.4 0.8 1.2 1.6 2.0
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Base to emitter voltage VBE (V)
VCE(sat) -- IC
Collector to emitter saturation voltage VCE(sat) (V)
100 30 10 3 1 0.3 0.1 0.03 0.01 0.01 0.03 Ta=75C 25C -25C IC/IB=10 3000
hFE -- IC
300 VCE=10V
fT -- I E
VCB=10V Ta=25C
Forward current transfer ratio hFE
2500 Ta=75C 25C -25C
Transition frequency fT (MHz)
0.3 1 3 10
250
2000
200
1500
150
1000
100
500
50
0.1
0.3
1
3
10
0 0.01 0.03
0.1
0 -1
-3
-10
-30
-100 -300 -1000
Collector current IC (A)
Collector current IC (A)
Emitter current IE (mA)
Cob -- VCB
24
Collector output capacitance Cob (pF)
20
IE=0 f=1MHz Ta=25C
16
12
8
4
0 1 3 10 30 100
Collector to base voltage VCB (V)
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of 2SD2259

	To Download 2SD2259 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .